Star Trac StairMaster Core Health & Fitness 15" Capacitive Touch OpenHub, Owner'S Manual

Page: 40 / 72

Page 39
Incline Calibration Procedure
1. Select Incline Calibration on the
Calibration and Setup screen.
2. Press START to begin the
calibration.
3. After the Speed Calibration
is completed, press EXIT; The
Calibration And Setup screen
appears.
4. Press to exit and go back to
the Home Screen.
5. The Incline Calibration has been
completed.
F
ig
. 22
- Incline Calibration (Treadmill Only)
Software Updates (GUI SW Update)
Follow online directions to download
latest software and place in root folder
of a USB stick:
https://support.corehandf.com/Software/
1. Insert USB stick into console USB
port.
2. Select GUI SW Update on the
Calibration and Setup screen.
3. Hold update button on bottom
of screen until update starts then
let go.
4. System will update in 7 steps.
Note: Steps 1 and 6 may appear
to take longer than other steps.
5. When console screen displays
“Power cycle required to
complete update” turn the unit
power off and on to complete.
F
ig
. 23
- GUI SW Update