635-4048
Created: 03/14/2005
•
Rev A
2
Part Installation Procedure
Diagram 6
Diagram 7
Diagram 8
Diagram 9
Diagram 10
Installing the Seat Clamp to the Seat
7. Using the 9/16 open end wrench loosen the two nuts that hold
the seat swivel clamp on the seat post. Hand-tighten the nuts
so the seat clamp does not swivel but is not completely tight.
(Diagram 5 and 6)
8. Tighten the nuts completely using a 9/16” open end wrench,
with the clamp facing the rear of the seat
9. Test the seat to make sure it does not tilt up or down and does
not swivel. If it does apply more torque until it will not. (Diagram
7)
