16
| SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL
7.
Remove the foam packaging from the rear section of
the Spinner frame (Fig. 7).
Fig. 7
8.
Locate the rear foot assembly along with the
corresponding hardware that secures it to the Spinner
frame (Fig. 8).
Hardware
:
M8x1.25x30mm Hex Head Bolt
8mm Split Lock Washer
8mm Plain Washer
Threaded Two Hole Bar
Qty:
2
2
2
1
Fig. 8
9.
Insert the threaded bar (Fig. 9) into each slot at the
bottom section of the rear foot bracket.
Fig. 9
