15
TOTAL LEGS
INSTALLATION
NOTE:
take special care when unwrapping unit, do not use knifes to cut open packaging damage may occur.
STEPS:
1.
Take main body off the pallet and place it on the floor.
2.
Attach the front handles to the main body.
Use (4) M12 washers and (4) M12 x 30 button head screws to handles to the main body; tighten
fasteners to (84 NM / 62 ft-lb) torque.
3.
Mount front panel to the front bottom of the handle frame.
Use (4) M8 x 50 button head screws, (4) M8 locking nuts, and (4) M8 washers. Tighten snuggly to
the frame.
4.
Mount (2) back panels to the lower section of the main body. Use (4) M8 x 50 button head screws,
(4) M8 locking nuts, and (4) M8 washers. Tighten snuggly to the frame.
5.
Mount the deck to the unit. Use (8) M8 x 20 button head screws, (8) M8 washers, and (8) M8 locking
n u t . Tighten f a s t e n e r s t o (2 4 NM / 18 ft-lb) torque.
6.
Attach accessories to the unit.
7.
Place urethane boots under feet.
