9
620-7922 Rev B
Step 12.
Identify cables coming out of neck and handlebar:
1.Heart rate cable
2.Main I/O cable
3.Coax cable
4.DC power cable
Note:
If unit is not equipped with Personal Viewing
Screen, the coax and DC power cables should be
tucked down the neck for possible future use.
Step 11.
Thread in (4) M8 x 20 flat head screws in the
front and back of the neck where the two pieces
came together. Tighten the screws to 150 lb-in
of torque.
Step 10.
Keep hold of the cables and rotate the display
up. Now slide the neck over the two mounts in
the lower neck.
Caution:
Take care not to pinch the cables or your
finger when the two pieces come together
Step 9.
Take upper display and neck assembly to the
front of the unit. Feed the cables from the lower
neck through the upper neck.
Note:
It may be necessary to have one person sup-
port and position the display while a second person
feeds the cables.
1
2
3
4
Summary of Contents for E-UB
