Star Trac E- RB 8110, Owner'S Manual

Page: 35 / 36

SSTAR TRAC E SERIES BIKES OWNER’S MANUAL 35
R
EGULATORY
I
NFORMATION
FCC AND OTHER DOMESTIC REGULATIONS
The E- UB / RB has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules.
Under the FCC guidelines, operation is subject to the following two guidelines: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
The Star Trac E- UB / RB generates and uses radio frequency energy. If the products are not installed and used in accordance
with the instructions provided in the owner’s manual, interference with radio communications may occur. Likewise, if
unapproved accessories are installed, interference with radio communications may occur. The intent of the FCC Class B limit is
to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that
interference may not occur in a specific installation. In the event that interference is experienced, turn off the unit to verify that
it is in fact the source. If the interference clears with the unit off, then try each of the following measures and combinations
thereof:
„
Reorient or relocate the bike
„
Reorient or relocate the receiving antenna of your television, radio, and / or VCR recorder.
„
Connect the unit to a different power outlet. (if applicable)
„
Consult Star Trac Support, your authorized dealer, or a qualified radio / television technician for assistance.
This product has been tested to meet the following standards:
„
UL 1647 Safety for Motor operated Message and Exercise Machines
CANADIAN DOC AND OTHER INTERNATIONAL REGULATIONS
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.
This product has also been tested to meet the following standards:
„
CSA C22.2 No. 0-M91 General Requirements
„
CSA C22.2 No. 68-92 Motor Operated Appliances
EUROPEAN APPLICATIONS
The product also has been tested to meet the following international standards:
EN 60355-1 Safety of the household and Similar Electrical appliance
EN 957-1 Safety of Machinery
EN 957-5 Pedal Crank training equipment, additional specific safety requirements
EN 61000-6-1 EMC Generic Standards, Immunity for residential, commercial and light-industrial environments.
EN 61000-6-3 EMC Generic Standards, Emissions standard for residential, commercial and light-industrial environments.