Page 4
4.
Use a 5mm allen key to secure the PVS bracket
to the console mast using four (4) M8 x 20mm
screws. Connect black/white power cable from
mast to red/black cable from the PVS bracket
then connect the male 3.5mm audio jack
from the mast to the female 3.5mm audio jack
extension from the PVS bracket. Finally, connect
the coax cable from the mast to the coax cable
from the PVS bracket and use a #2 phillips
screwdriver to secure the PVS top cover to the
console rear shroud.
5.
Slide the PVS bracket grommet down the PVS
bracket and into position so a seal is made
between the PVS bracket and the rear console
shroud.
6.
Slide the PVS grommet down onto the PVS
bracket.
7.
Use a #2 phillips screwdriver to remove the eight
(8) screws securing the PVS rear shroud, then
remove the PVS shroud. Next, use a #2 phillips
screwdriver to remove the four (4) screws shown
right. Re-use the screws to secure the PVS to the
PVS bracket.