OK Key:
Updates (saves) the values of all parameters in non-volatile memory, and exits Manager Mode.
NOTE:
To exit Manager Mode without saving any values or settings, press the Q
UICK
S
TART
key.
The items that you may display and change with the previous keys are:
MAINTENANCE MODE
Your Service Representative may need to check accumulated data about the past usage of your
STAR TRAC P-ST STEPPER
, test its dis-
play controls, or investigate error messages. For these reasons, your Stepper is equipped with a Maintenance Mode. The Maintenance
Mode includes all of the items available through Manager Mode, plus additional items for Service and Diagnostic use. To enter
Maintenance Mode:
1. Press and
hold
the
,
and keys
together.
2. A beep will sound and “MAINTENANCE MODE” will display momentarily in the Information Window.
3. Release all keys. “SERIAL NO #####” will display in the Information Window.
The following keys are available in MAINTENANCE MODE:
Upper and Lower Data Information Window S
CROLL
Keys:
Display the next and previous parameters, respec-
tively. Keys will repeat if held.
Increase and Decrease L
EVEL
Keys:
Adjust the value of the displayed parameter up and down, respectively, in incre-
ments of 1 unit. These keys
do not
save the new value - see
OK Key
below.
Numeric Keypad:
Allows you to enter specific values for numeric parameters. These keys
do not
save the new value
- see
OK Key
below.
OK Key:
Updates (saves) the values of all parameters in non-volatile memory, and exits Maintenance Mode.
NOTE:
To exit Maintenance Mode without saving any values or settings, press the Q
UICK
S
TART
key.
The items that you may display and change with the previous keys are:
STAR TRAC P-ST STEPPER O
WNER
’
S
M
ANUAL
27
Lowest
Highest
Default
Item
Value
Value
Value
Meaning
Serial No
0
65535
0
Serial number (set by factory)
Date
01/00
12/99
01/05
Manufacture date for the Stepper (set by factory)
Display Vers 1
01.00
99.99
N/A
Display panel software version (set by factory)
Display Vers 2
01.00
99.99
N/A
Display panel software version (set by factory)
LCB Vers
01.00
99.99
N/A
Display panel software version (set by factory)
Units
English
Metric
English
English = units of pounds, feet,
Metric = units of kilograms, meters
Time
5
99
99
Maximum time in minutes allowed for program, excluding cool-down.
Weight
1 (Lb)
350 (Lb)
155 lbs
Default (to user), typical weight in lb (UNITS=English), or kg
1 (KG)
158 (KG)
70 (KG)
(UNITS=Metric).
Language
N/A
N/A
ENGL
Language is English (ENGL), Dutch (DUTC), French (FREN), German (GERM),
Portuguese (PORT), Spanish (SPAN), Swedish (SWED), Italian (ITAL) or Katakana
(KATA).