STAR TRAC P-ST STEPPER O
WNER
’
S
M
ANUAL
13
Remove the Stepper base from the cardboard pallet.
Thread two handrail screws, PN 110-0506, into each side handrail, but do not fully
tighten the screws at this time. The screws are tightened during installation of the dis-
play assembly.
3. Install the Display Assembly
CAUTION:
Use care to avoid pinching your finger between the display assembly
and the neck of the Stepper.
While holding the display assembly in position near the neck of the Stepper, plug
the display assembly cable into the mating connector at the neck of the Stepper.
Step 2B
Step 2C
Step 3A