Star Micronics TUP400 Series, Technical Manual

Page: 6 / 80

– 6 –
1. General Specifications
Printing method Line thermal direct
Resolution 8 dots/mm (H)
×
8 dots/mm (V)
Printable width 50 mm in Line Mode; 80 mm in Page Mode
Printing speeds 2 Inches/sec and 1 Inch/sec
Printable characters Page mode: ANK, International, Slash zero
Line mode: ANK, International, Special, Block graphics, IBM special,
IBM block graphics, Chinese characters, Slash zero
NOTE: ANK is comprised of ASCII characters and Japanese katakana characters.
Character matrixes Page mode
Small 8
×
16
Standard 16
×
24
Wide 24
×
32
OCR-B 16
×
24
Chinese chara. 24
×
24
Line mode
IBM block graphic 12
×
24 or 12
×
32
Chinese chara. 24
×
24 (12
×
24)
All others 12
×
24
Bar Codes JAN, EAN, UPC, Code39, ITF, Code93, Code128, NW-7
Paper
Recommended brands TF50KS-E, TF62KS-E (Nippon Paper Industries)
KP50-HEAEX (New Oji Paper Co., Ltd.)
Width 82.5 mm(3.25 inches)
Thickness General thermal paper 60 to 85
µ
m
Roll diameters External 203 mm max. (8 Inch), Internal 32 mm (1.26 Inch)
Interface RS232C, RS422A, or Parallel
MCBF 5,000,000 Lines
Head longevity 100 Km or 1.0 x 10 8 pulses(excludes damaged caused by dirt or foreign objects.)
(Missing dots is Max. 5%. However, there will be no missing dots up to 50Km.
This is the point where the thermal body resistor value varies more than 15% of the
initial value when continuously printing up to 12.5% of the printing rate.)
Cutter longevity 300,000 cuts (One piece max. paper thickness: 85
µ
m.)
Power supply DC 24 V
±
7%
Power consumption Max. 120 W
Operating environment Temperature 5
°
C to 40
°
C
Humidity 25% to 80% (No condensation)
Storage environment Temperature -20
°
C to 60
°
C
Humidity 10% to 90% (No condensation)
Fig. 1-1 External Dimensions
164mm
164mm
299mm
254mm
356mm
Approximately 3.3kg Approximately 3.1kg
254mm
TUP452 TUP482
0
-1