– 15 –
(11) Press the FEED button to bring up the
leading edge of the roll paper.
Note:
If the leading edge of a label is not
detected after 300 mm or more of the
roll is fed, the printer will determine
that it is out of paper, and will stop.
Redo the loading of the roll paper
from the beginning.
(12) The printer will eject a label as shown.
3-6-3. Thermal Roll Paper
(1) Check that dip switch 1-8 is OFF (thermal
roll paper).
(2) Turn ON the power switch of the printer.
(3) Push the front cover downward.
(4) Open both the outer and inner printer cov-
ers.
(5) Adjust the roll paper guide to the width of
the roll paper.
