Star Micronics TSP552II, User Manual

Page: 99 / 113

– 95 –
APPENDIX
A-1. General Specifications
(1) Printing method Direct line thermal printing
(2) Print speed 130 mm/s
Note: Print duty is 16.5% or less.
(3) Dot density 8 dots/mm (0.125 mm/dot)
(4) Number of print columns
48
(5) Roll paper Refer to chapter 3 for details on the recommended
paper.
Paper width: 80 mm
Roll diameter: ø83 mm or less
External diameter of core: ø18 mm
Internal diameter of core: ø12
±
0.5 mm
(6) Cutter Partial cut (leaving the center of the paper intact)
(7) Sensor Paper end, cover open, paper near end
(8) Overall dimension 142 (W)
×
215 (D)
×
149 (H) (mm)
(9) Weight Approx. 2.2 kg
A-2. Print Specifications
(1) Print width 72 mm
(2) Character size 1.25W
×
2.75H (mm)
(3) Column pitch 1.5 mm
(4) Character set Numeric, alphabet, kana, special, ruled line symbols,
extended graphic, international, user characters
(5) Character enlargement/reduction
double width, double height, double size
A-3. Interface
(1) Interface RS232C serial interface or Two-way parallel inter-
face (IEEE1284)
(2) Command ESC/POS
TM
commands or Star commands
Appendix A: Specifications
0
- 1.0
+0.5
0