Star Micronics TSP552II, User Manual

Page: 9 / 113

– 5 –
ENGLISH
4. Connecting Cables and AC Adapter
4-1. Connecting the Interface Cable
Note: Before connecting/disconnecting the interface cable, make sure that
power to the printer and all the devices connected to the printer is
turned off. Also make sure the power cable plug is disconnected from
the AC outlet.
(1) Connect the interface cable to the connector on the rear panel of the printer.
(2) In the case of a serial interface, tighten the connector screws. In the case of a
parallel interface, fasten the connector clasps.
(3) Pass the interface cable through the hole provided at the bottom of the printer
cover, then place the printer in position.
Note: Make sure that the interface cable is passed through the hole. Failure
to do so may cause the cable to be squashed by the printer, resulting in
damage to the cable.
Serial interface cable
Parallel interface cable