– 2 –
1-2. Choosing a place for the printer
Before actually unpacking the printer, you should take a few minutes to think about
where you plan to use it. Remember the following points when doing this.
Choose a firm, level surface where the printer will not be exposed to vibration.
The power outlet you plan to connect to for power should be nearby and unobstructed.
Make sure that the printer is close enough to your host computer for you to connect
the two.
Make sure that the printer is not exposed to direct sunlight.
Make sure that the printer is well away from heaters and other sources of extreme
heat.
Make sure that the surrounding area is clean, dry, and free of dust.
Make sure that the printer is connected to a reliable power outlet. It should not be on
the same electric circuit as copiers, refrigerators, or other appliances that cause power
spikes.
Make sure that the room where you are using the printer is not too humid
.
This device emplo
ys a DC motor and switches that have an electrical contact point.
Avoid using the de
vice in environments where silicon gas can become volatile.
WARNING
Shut down your equipment immediately if it produces smoke, a strange odor, or un-
usual noise. Immediately unplug the equipment and contact your dealer for advice.
Never attempt to repair this product yourself. Improper repair work can be dangerous.
Never disassemble or modify this product. Tampering with this product may result
in injury, fire, or electric shock.
Summary of Contents for TSP100LAN
Page 1: ...TSP100LAN Hardware Manual ...
