Star Micronics TCP300V Series Operation Manual Download Page 27

Page: 27 / 66

��

�

��

�

��

Insert card to

exchange

��

�

��

�

��

No.

[A123456-00200]

This time P

[+ 20p]

Total Pnt

[ 180p]

��

�

��

�

��

Exchange card?

[

YES

]

[NO]

��

�

��

�

��

No.

[ - ]

This time P

[ p]

Total Pnt

[ p]

��

�

��

�

��

Function 1

[Set member's name]

[Reissue card]

[

Exchange card

]

[Void card]

Press

while the system is idling.

In Function 1, use either

to select [Invalidate member

card], and press

Insert the current member card.

The current information of the card is displayed.

A confirmation for exchanging the card is displayed.

Use

to select [YES]. [YES] and [NO] can be switched using

and

. Use

to confirm the selection.

If [NO] is selected, the system idles again.

The data on the current member card becomes invalidated and

the customer number and point display are erased.

"This card was exchange" is printed onto the invalidated card and

then the card is ejected from the machine.

Basic Operations

•

Exchanging a member card

Exchange a member card when the printing area of the card has degraded.

Summary of Contents for TCP300V Series



































































Search results

Summary of Contents for TCP300V Series

Reviews:

Star Micronics TCP300V Series, Operation Manual, Page: 27 / 66

Search results

Summary of Contents for TCP300V Series

Reviews: