Star Micronics Co., Ltd.
Star Line Mode Printer Driver – Windows 95 / 98 / Me
Copyright 2002
Version 3.11.0.0
19 / 21
Printer Configuration
Star printers can be configured via two different mechanisms.
1. DIP switches (mechanical switched)
2. Memory
switches
When using these drivers with your Star printer
no changes to the factory default DIP switch settings are
required.
In addition, the
factory default memory switch settings do not need to be changed unless you choose to use
black mark paper.
When using black mark paper with your printer you must enable the printer’s black mark sensor. This is
done via memory switches. The table below lists the memory switch position used to enable the black mark
sensor for all black mark capable printers.
Model
Bank Bit 1 - On
0 – Off
TSP613
1
8
black mark sensor enabled
black mark sensor disabled
TSP643
1
8
black mark sensor enabled
black mark sensor disabled
1
8
black mark sensor enabled
black mark sensor disabled
TSP743
1
9
top search function enabled
top-search function disabled
1
8
black mark sensor enabled
black mark sensor disabled
TSP847
1
9
top search function enabled
top search function disabled
1
8
black mark sensor enabled
black mark sensor disabled
TUP942
1
9
top search function enabled
top search function disabled
1
8
black mark sensor enabled
black mark sensor disabled
TUP992
top search function enabled
top search function disabled
Note:
The TSP613 and TSP643 models must have the additional black mark sensor installed in order to be used
with black mark paper. Please contact your Star representative for more information about adding this
sensor to the TSP613 and TSP643 models.
