Star Micronics SLIP SP298 SERIES, Programmer'S Manual

Page: 28 / 79

25
Slip Control
Page mode
Other Commands
Control Codes
Hexadecimal
Codes
Function Page
<ESC> <SI> n 1B 0F n Setting slip sensor 46
<ESC> <FF> n 1B 0C n Slip function 46
<ESC> <VT> m n 1B 0B m n Sets the paper eject direction/length 47
<EOT> 04 Slip status enquiry 47
<ESC> <EM>
m n
<LF> <NUL>
1B 19
n m
0A 00 Sets the wait time until the automatic clamp is activated 48
Control Codes
Hexadecimal
Codes
Function Page
<ESC> “n” 1B 6E Selects page mode 48
<ESC> “!” 1B 21 Selects line mode 50
<ESC> “*” ... 1B 2A ... Setting print area in page mode 50
<ESC> “T” n 1B 54 n Setting print direction in page mode 51
<FF> 0C Prints in page mode 53
Control Codes
Hexadecimal
Codes
Function Page
<CAN> 18 Cancels printer buffer & Initialize printer (imimediately) 54
<DC3> 13 Deselects printer 54
<DC1> 11 Sets select mode 54
<RS> 1E Beeps the buzzer 54
<ESC> “#N, n 1 n 2 n 3
n 4 ”
<LF> <NUL>
1B 23 N 2C n 1 n 2
n 3 n 4
0A 00
Sets memory switch 55
<ESC> “@” 1B 40 Initialize printer 58
<ENQ> 05 Enquiry 58
<ESC> “?” <LF>
<NUL>
1B 3F 0A 00 Resets printer hardware and produces a test print 59