Star Micronics lC-10, Technical Manual

Page: 40 / 151

PARTS REPLACEMENT
– 37 –
1. Upper Case Unit
(1) Turn off the power switch [1] .
(2) Remove
•
Printer cover
•
Rear cover
•
Platen knob [2]
•
Four screws
[3]
(3) Move the Carriage Unit [4] over to the right so that
it aligns with the cut-out of the upper case unit [5] .
(4) Remove
•
Upper case unit [5]
Clasp the back side of the upper case unit, and
gently push it further forward.
•
Control panel board [6]
2. Printer Mechanism
(1) Remove
•
Upper case unit according to the procedure de-
scribed in item 1.
•
Stop ring
[1]
•
Release lever [2]
•
Gear lever [3]
•
Four tapping screws
[4]
•
Screw
[5]
•
Connector cover [6]
Lift up the tab of the connector cover, and slide it
to the right for removal.
•
Printer head cable [7]
•
Three connectors
[8]
•
Printer mechanism [9]
Caution in assembly:
Align the the
∆
mark on the Release lever
[2]
with
the
∆
mark on the Release gear
[3]
to install the
Release lever
[2]
.