– 27 –
7-3. Releasing a Locked Cutter (Auto Cutter Mode only)
If the auto cutter locks up or fails to cut the paper, follow the steps below.
WARNING
Since working on the cutter may be dangerous, be sure to turn off the printer first.
(1) Set the power switch to OFF to turn off the printer.
(2) Remove the front cover to reveal the auto cutter.
(3) Remove any jammed paper.
Note:
Be careful not to damage the printer while removing any jammed paper.
Since the thermal print head is particularly sensitive, be sure not to touch it.
Auto cutter
Front cover
Summary of Contents for futurePRNT TSP100
Page 1: ...Hardware Manual ...
