The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
1. Before cleaning and assembling, do not plug the pins into the socket.
2. To ensure adequate air circulation to the motor. Keep vents at the rear of the
motor housing from dust, fluff and etc. A vancuum cleaner can not be used to
clean these vents before unplug. Do not disassemble the fan remove fluff.
MAINTENANCE INSTRUCTION
8
OPERATING INSTRUCTION
1. Speed is controlled by depressing the piano keys.
0---Stop 1---Lower 2---Medium 3---High
2. To make/stop the fan head oscillate. Push down/pull up the
clutch knob.
3. The airflow can be adjusted upward or downward by loosening
the tilt adjustment knob and adjusted the vertical angle as
desired. Retighten the knob securely.
4. The height of the fan can be adjusted by loosening the height
adjustment ring carefully raising or lowering the fan and firmly
tightening the ring.
1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the
plastic nut counter clockwise to remove both of them. Fix the rear guard to the
motor then tighten the plastic nut again. (Fig. 5)
2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove
of the blade. Turn the spinner counterclockwise to tighten the blade. (Fig. 5)
3. Fix the front guard and the rear guard with circlip and then tighten the fan guard
locking screw and nut. (Fig. 7)
ASSEMBLY OF BLADE OF GRILLES
Fig.6
7
.
g
i
F
5
.
g
i
F
