background image

5

6

CAUTIONS FOR ALL DEEP FAT FRYERS

NEVER LEAVE AN OPERATING FRYER UNATTENDED

REMEMBER HOT OIL IS DANGEROUS – 

RESPECT IT!

 WARNING – INSTALLATION  

•  Locate your fryer in a protected place so 

that it cannot be tipped over or knocked 

off its support.  A mechanical restraint 

should be installed to prohibit the fryer 

from tipping or moving. Consult your local 

codes for allowable methods of restraint.

•  Install an automatic fi re extinguisher over 

the fryer and in the exhaust duct.

• Be sure your power supply is installed

  properly and in accordance with the local

  and national codes.
• Install a shut-off switch or gas valve close 

to the fryer.  It must turn off the fryer 

immediately.

• Failure to add a mechanical restraint can 

result in oil splashing out and contacting 

the skin, leading to serious injury or death!

 WARNING – HOT OIL

• Hot oil is dangerous – Severe burns can 

result when hot oil contacts the skin.

• Hot oil is fl ammable – Keep open fl ames 

away from hot oil and its vapors.

• Never allow water or ice to get in hot oil. 

IT CAN EXPLODE!  

 WARNING - ENVIRONMENT

• Keep your fl oors clean and free of grease and 

all other substances so no one slips 

accidentally and contacts the hot fryer.

• Keep areas and fi lters clean above your fryers 

– Oil soiled lint or dust can ignite easily and 

fl ames will spread rapidly.

 WARNING – MAINTENANCE

• Have your equipment checked regularly to 

insure its safe and properly functioning.

• If your fryer starts to smoke or boil 

abnormally, cut off the power supply 

immediately and determine the reason for 

the smoking or boiling before attempting 

to use it again.

 WARNING – TRAINING

• Train all personnel to understand the haz-

ards of hot oil.  Instruct them on the proper 

action to take if something does not seem 

to be acting properly.

• Instruct your personnel on what to do if 

there is an oil fi re.  Do not use water on 

an oil fi re!  Use only fi re extinguishers of 

the approved type and never direct such 

extinguishers so as to blow the oil out of 

the oil container.

Summary of Contents for 510FD Series













Reviews: