8
NOTE: Temperature settings are done with the Left side buttons
only. The time settings
programmed on the left buttons will also be programmed onto the
Right side.
See the next
section to make time changes to the
Right side
only.
Each programming change must be
saved by pressing the TEMP button!
Right Side (Timer only):
1. To change the time on right, press and hold the TEMP button, then press and hold
any program button on the right for one second. The LED above the program button
will light and the right display will read "_ _ _ _." Enter the four-digit security code
sequence: 4, 3, 2, 1.
The security code
will not
show on display. Once the correct sequence
has been entered, the preset time will be displayed and the LED for that program will begin
to
fl
ash.
2. Set the time with the "+ or -" buttons.
3.
Press the TEMP button to save the time.
4. The LED will stop
fl
ashing but will remain lit.
5. Press any other program button within 15 seconds to continue programming without
re-entering the security code.
6. While programming a program (LED is
fl
ashing), if no input is received for 15 seconds
the unit will revert to normal operation and the security code must be re-entered.
Operation:
1. Pressing any program button (1-4) will start the timer countdown and display the remaining
preset time. The LED for the appropriate program will be lit during the countdown and will
remain lit until another program is selected.
2. When the display reaches "00:00", the buzzer will sound and the digits will
fl
ash.
3. Press the program button to silence the buzzer and return the readout to programmed
time.
4. The right and left sides will operate independently of each other. Both timers can be in
operation at the same time. The "00:00" display will show which side is timed out.
NOTE:
Metal utensils may be used, however, using nonmetal utensils will prolong the life
of the cooking surface.
5. Turn the unit off when it is not in use.