7
Control pads
When you push the button to change operation modes, the unit will make a beep
sound to indicate that it is changing modes.
1 – Power pad
Press to turn the dehumidifier on and off.
NOTE: When the compressor startups or stops running, the unit may make a loud
voice, it is normal.
2 – Mode pad
Press to select the desired operation mode from
Dehumidifying, Dryer, Continuous dehumidifying and Smart dehumidifying.
NOTE: Dryer and Smart dehumidifying modes are optional.
3, 4 –
Down/Up pads
•
Humidity Set Control Pads
The humidity level can be set within a range of 35%R H (Relative Humidity) to
85%R H (Relative Humidity) in 5% increments.
For drier air, press the - pad and set to a lower percent value(%).
For damper air, press the + pad and set a higher percent value(%).
•
Timer set control pads
Use the Up/Down pads to set the Auto start and Auto stop time from 0.0 to 24
5 – Timer pad
