Star Lake SR10B User Manual Download Page 55

Page: 55 / 62

SR10B

User’s Manual

Revision Date: Oct. 07. 2016

Disabled=Azalia will be unconditionally disabled.

Enabled=Azalia will be unconditionally Enabled.

Auto=Azalia will be enabled if present, disabled otherwise.

Azalia Docking Support: Enable or disable Azalia Docking Support of Audio Controller.

Azalia PME: Enable or disable Power Management capability of Audio Controller.

PCH LAN Controller

Enable or disable onboard NIC.

Wake on LAN:

Enable or disable integrated LAN to wake the system. (The Wake On LAN cannot be

disabled if ME is on at Sx state.)

SLP_LAN# Low on DC Power:

Enable/Disable SLP_LAN# Low on DC Power.

Board Capability

Board Capability-SUS_PWR_DN_ACK->Send Disabled to PCH, DeepSx->Show DeepSx Policies.

GP27 Wake From DeepSx

Wake from DeepSx by the assertion of GP27 pin.

PCIE Wake From DeepSx

Wake from DeepSx by the assertion of PCIE.

Serial IRQ Mode

Configure Serial IRQ Mode.

SLP_S4 Assertion Width

Select a minimum assertion width of the SLP_S4# signal.

Port 80h Redirection

Control where the Port 80h cycles are sent.

Summary of Contents for SR10B































































Search results

Summary of Contents for SR10B

Reviews:

Related manuals for SR10B

Brands by name

Popular brands

Star Lake SR10B, User Manual

Search results

Summary of Contents for SR10B

Reviews:

Related manuals for SR10B

Brands by name

Popular brands