Star Lake SR10B User Manual Download

Page: 31 / 62

SR10B

User’s Manual

Revision Date: Oct. 07. 2016

Software Feature Mask Configuration

RADI OROM/RST driver will refer to the SWFW configuration to enable or disable the storage

features.

RAID0:

Enable or disable RAID0 feature.

RAID1:

Enable or disable RAID1 feature.

RAID10:

Enable or disable RAID10 feature.

RAID5:

Enable or disable RAID5 feature.

Intel Rapid Recovery Technology: Enable or disable Intel Rapid Recovery Technology.

OROM UI and Banner:

If enabled, then the OROM UI is shown. Otherwise, no OROM banner

or information will be displayed if all disks and RAID volumes are Normal.

HDD unlock:

If enabled, indicates that the HDD password unlock in the OS is enabled.

LED Locate:

If enabled, indicates that the LED/SGPIO hardware is attached and ping yo locate

features is enabled on the OS.

IRRT Only on eSATA:

If enabled, then only IRRT volumes can span internal and eSATA drives. If

disabled, then any RAID volume can span internal and eSATA drives.

Smart Response Technology: Enabled or disable Smart Response Technology.

OROM UI Delay:

If enabled, indicates the delay of the OROM UI Splash Screen in a normal status.

The options are 2 seconds, 4 seconds, 6 seconds, 8 seconds.

Serial ATA Port 0

Port 0:

Enable or disable SATA port

Hot Plug:

Designates this port as Hot Pluggable.

External SATA:

External SATA support.

SATA device type:

Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.

Spin Up Device:

On an edge detec from 0 to 1, the PCH starts a COMRESET initialization sequence to

the device.

Serial ATA Port 1

Port 1:

Enable or disable SATA port

Hot Plug:

Designates this port as Hot Pluggable.

External SATA:

External SATA support.

SATA device type:

Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.

Summary of Contents for SR10B































































Search results

Summary of Contents for SR10B

Reviews:

Related manuals for SR10B

Brands by name

Popular brands

Star Lake SR10B, User Manual

Search results

Summary of Contents for SR10B

Reviews:

Related manuals for SR10B

Brands by name

Popular brands