-5-
Operating Instructions
Electrical Connections
1. After the light is secured, route your cord to your ON/OFF switch (not provided). If
you need a switch, you may order Star part #SP3860-1 lighted ON/OFF rocker
switch.
2. Connect the black wire from the cable to the negative terminal of your battery
(preferred) or a good chassis ground.
3. Connect the white wire to +12VDC through your ON/OFF switch.
1. The ULB42-3 rear window
Star Phantom
®
is designed for simple operation.
This unit has only a Pattern Select Button.
2. This is a momentary switch. Each time this switch-button is depressed while
The Star Phantom
®
is activated, it will cycle to the next pattern.
The Star
Phantom
®
is designed with thirty-five different patterns, listed on the following
page.
Indicator LED
Located on the bottom of the
Star Phantom
®
is an Indicator LED. When
your light is activated in any mode, this LED will light up.
Because of the wide variety of mounting applications,
Star Headlight & Lantern Co., Inc. assumes no
responsibility for the secure mounting of this light. It
is the responsibility of the installer and/or owner to
ensure the lightbar is mounted securely. Check your
light every time you enter the vehicle to ensure that it
is mounted securely.
