-i-
It is the sole responsibility of the owner to ensure the lightbar is
mounted securely. Check your light every time you enter the
vehicle to ensure that it is mounted securely. The manufacturer
assumes no responsibility for the secure mounting of this light.
PLEASE NOTE: THE DIRECT MOUNT IS THE STANDARD
MOUNT INCLUDED WITH THE LIGHTBAR.
THE HOOK MOUNTS MUST BE USED ON ALL POLICE AND/OR
OTHER EMERGENCY VEHICLES!!!
THE HOOK MOUNTS ARE SOLD SEPARATELY. THEY ARE
NOT INCLUDED WITH EACH LIGHTBAR. THEY MUST BE
ORDERED SEPARATELY. SEE THE ACCOMPANYING HOOK
MOUNT SHEET FOR A COMPLETE LIST OF AVAILABLE
MOUNTS AND KNOWN VEHICLE APPLICATIONS.
!!!!
When mounting your lightbar, please be sure to keep any radio frequency
sensitive equipment at least 20” from the bar and power cable(s). This is
especially critical in lightbars utilizing strobes. Our strobe power supplies have
been designed to limit RFI emissions, but certain very sensitive equipment
may still be affected. Symptoms may include, but are not limited to, sporadic
operation and degraded performance. Star Headlight & Lantern Co., Inc.
cannot assume any responsibility for any radio frequency induced malfunction
or damage to any radios, sirens, lightbars, or any other equipment mounted
within 20” a strobe lightbar. Any antennae mounted in the proximity of the
lightbar may cause your radio to suffer the aforementioned results.
Please Note:
These instructions are provided as a general guideline only.
Some
vehicles may require special mounting, wiring, and/or weather-sealing. This is the
sole responsibility of the installer.
Star Headlight & Lantern Co., Inc. assumes no
responsibility for the integrity of the installation for this or any of its products.
