-7-
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and information,
contained in this manual at any time without notice. Star Headlight & Lantern Co., Inc. makes no warranty of any
kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness
for a particular purpose. Signal Vehicle Products, Inc. shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing, performance, or use of this manual.
LED FIVE YEAR LIMITED WARRANTY
The manufacturer warrants this LED light against factory defects in material and workmanship for five years
after the date of purchase. The owner will be responsible for returning to the Service Center any defective
item(s) with the transportation costs prepaid. The manufacturer will, without charge, repair or replace
at its
option
, products, or part(s), which its inspection determines to be defective. Repaired or replacement
item(s) will be returned to the purchaser with transportation costs prepaid from the service point. A copy of
the purchaser's receipt must be returned with the defective item(s) in order to qualify for the warranty
coverage. Exclusions from this warranty include, but are not limited to, domes, and/or the finish. This
warranty shall not apply to any light, which has been altered, such that in the manufacturer's judgment, the
performance or reliability has been affected, or if any damage has resulted from abnormal use or service.
There are no warranties expressed or implied (including any warranty of merchantability or fitness), which
extend this warranty period.
The loss of use of the product, loss of time, inconvenience, commercial loss or
consequential damages, including costs of any labor, are not covered
. The manufacturer reserves the right
to change the design of the product without assuming any obligation to modify any product previously
manufactured.
This warranty gives you specific legal rights. You might also have additional rights that may vary from state to
state. Some states do not allow limitations on how long an implied warranty lasts. Some states do not allow
the exclusion or limitation of incidental or consequential damages. Therefore, the above limitation(s) or
exclusion(s) may not apply to you.
These lights use state-of-the-art Light Emitting Diode (LED) technology. These
warning lights are comprised of ultra-high intensity LEDs that are controlled by a
solid state flasher unit to efficiently produce light output with lifetimes up to
100,000 hours. Under normal circumstances, you will not need to replace any
LEDs in this light. If any of the LED's in your light do fail, please contact Star
Headlight for arrangements to have them repaired. The flasher unit and heads
CANNOT be serviced in the field and any attempt to do so will void the warranty.
If you have any questions concerning this or any other product, please contact our
Customer Service Department
at (585) 226-9787.
If a product must be returned for any reason, please call the Customer Service
number listed above and ask for the Repair Department to obtain a
Returned Material Authorization number (RMA #) before you ship the product back.
Please write the RMA # clearly on the package near the mailing label.
STEADY BURN PROGRAMMING
1. Hold the Pattern Select Button or touch the green wire to Ground until the light blinks 6
times (approximately 18 seconds), then release it.
For lights in
Split Mode
, one of the two halves will become steady, while the other
flashes.
•
To change the pattern on the flashing side, press and release the Pattern Select
Button or touch and release the green wire to Ground.
•
To flip-flop the steady side and the flashing sides, hold the Pattern Select
Button or touch the green wire to ground until the light flashes 5 times
(approximately 15 seconds) and then release it.
For lights in
Full Mode
, the entire light should illuminate steady burn.
2. To exit Steady burn pattern:
Split Mode
- Hold the Green wire to Ground until the light
blinks six times (approximately 18 seconds).
Full Mode
- Touch and release the Green wire to Ground.
