-5-
Pattern List
1
Slow Warn *
2
Fast Warn
3
Superfast Warn
4
Warn Fade
5
Pre-Pop Warn
6
All Singleflash
7
Alt. Tripleflash
8
All Tripleflash
9
Alt. Quadflash w/Post Pop
10 All Quadflash w/Post Pop
11 Alt. Quintflash
12 All Quintflash
13 Alt. Pre-pop Quintflash
14 All Flicker
15 Alt. PSU Flicker
16 One Side Pop, Other Side Rapid Fire
17 One Side Rapid Fire, Other Pop
18 Comet 1
19 Comet 2
20 Delta Omega (Flash Rate Sweep)
21 Slow Warn, Superfast Warn
22 All Singleflash, All Flicker
23 Alt. Double, ALT. Quad w/Post Pop
24 All Double, ALL. Quad w/Post Pop
25 Alt Double, Alt. Pre-Pop Quad, Alt. Quad w/Post Pop, Alt Flicker
26 All Double, All Quintflash, All Quadflash w/Post Pop, All Flicker
27 All Quadflash w/Post Pop, All Doubleflash, All Flicker
28 Alt. Pre-Pop Triple, Alt. Doubleflash, Alt Flicker **
29 Alt. Pre-Pops, Alt. Flicker, Superfast Warn
30 Delta Omega, All. Double, All. Flicker
31 One Side Steady---Other side Singleflash
32 One Side Steady---Other Side Short-Long
33 Warn Medium (Alt. Long Singleflash)
34 Alt. Short - Alt. Long
35 Cycle All
*
Default Pattern #1
**
Default Pattern #2
If at anytime you would like to go directly to the Slow Warn (pattern #1), simply press,
and hold the pattern select button for approximately 3 seconds. When the LEDs
flash once, release the button and the light will be in the Slow Warn pattern.
If you would like to place the light back into the default pattern (Pattern 28: Alt. Pre-
Pop Triple, Alt. Doubleflash, Alt Flicker), simply press and hold the pattern select
button until the LED’s flash twice (approx. 6 seconds). Then release the button and
the light should be in the default pattern.
Toggle Mode:
Pressing and holding the pattern select button until the LED’s flash
three times (approx. 9 seconds) will toggle the “steady side” for patterns 31 and 32.
Indicator LED
(some models)
:
Pressing and holding the pattern select button until
the LED’s flash four times (approx. 12 seconds) will disable or enable the indicator
LED.
The
Split Phantom
will remember the pattern it was in when turned off and display
the same pattern when re-activated.
