Star Cooperation 3-01000A01-01, Instructions For Use Manual, Page: 7 / 18

Created by STAR ELECTRONICS GmbH & Co. KG
Date created 2020-11-04 Date modified 2020-11-04 Page 7 of 18
3
7
-0
0
1
-T
0
8
_I
nst
ru
ct
io
n_
fo
r_
U
se
_D
1
V
9
-F
2 Product Description
2.1 FlexMedia 1000BASE-T1 at a glance
The FlexMedia 1000BASE-T1 is a converter for 100/1000BASE-T1 to 100/1000BASE-TX and vice versa.
With the FlexMedia 1000BASE-T1, it is possible to connect an automotive Ethernet network to a standard
PC for testing or diagnostic purposes. It supports up to 1000 MBit/s in full duplex mode on both sides.
•
Master and slave mode selectable via DIP-switch
•
100 MBit/s and 1000 MBit/s mode selectable via DIP-switch
•
Automatic selection of A0 and A2 mode
•
Marvell 88Q2112-A2-NYD2A000 transceiver is used for the 1000BASE-T1 conversion
•
Supply voltage: 8-48V DC
•
Status LEDs
•
RJ45 connector for 1000BASE-TX
•
D-Sub 9 pin male connector for 1000BASE-T1
•
IP20
•
Temperature range -40°C to +70°C
2.2 Accessory Parts
For further information about accessories for the FlexMedia 1000BASE-T1 see chapter 7.2 Accessory
Parts.
NOTICE
Use only accessory parts from STAR COOPERATION listed in chapter 7.2 Accessory
Parts to ensure proper function and for warranty reasons!
Other accessories without prior written consent of STAR COOPERATION must not be
used.