manualshive.com logo in svg

Stanton SCS.3m, User Manual

Share
Download
Stanton SCS.3m User Manual Download Page 51

Using a Cue Point

Using the top slider in EQ mode, move the red play marker to the first beat in the song, then press
the CUE button to lock in that cue point. (Figure 6.2)

47

Figure 6.2

Once the cue point is set, do the same thing with the song in Deck B.

6.1.3

Using a Cue Point

Now that the cue point has been set, there are different behaviors you might see depending on how
the CUE button is used.

•  On a paused deck, clicking cue sets a new current cue point at the current play position.

    In 

Snap Mode

, this cue point will snap to the beat nearest the play position.

•  When the track is paused and cued up to the current cue point, click and hold the cue button

    to pre-listen to the cue placement. Release cue to return to the current cue point or press
    PLAY to resume playback without returning to the cue point.

•  Clicking  cue  during  playback  jumps  the  current  play  position  back  to  the  previously  set

    current cue point and stops playback.

Play with the cue button on both decks. Once you feel comfortable, we will mix these 2 songs together!

6.1.4

Sync’ing Two Decks

FX

E

QQ

E

QQ

FX

MASTER

R

Figure 6.3

Before  you  can  mix,  you  have  to  have  something  to  mix  into, 
so let’s hit PLAY on Deck A. Also, let’s make sure that the mixer is
ready for us to mix on. Use your finger to turn the channel volumes
up to the top, and then move the crossfader all the way to the left.
(Figure 6.3)

Summary of Contents for SCS.3m









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands