background image

T E C H N I CA L S P E C I FI C AT I O N S

Line inputs: 

2

(RCA), 

150 

mV / 

47

K ohm

Phono inputs: 

2

(RCA), 

3

mV / 

47

K ohm

DJ mic input: 

1

(1/4 inch), 

1.5

mV / 

600

ohm

Master output: 

1

(RCA), 

1

V / 

600 

ohm

Record output: 

1

(RCA), 

330 

mV / 

600

ohm

Headphone output:

1

(1/4 inch), 

32 

-

200 

ohms recommended

Frequency Response: 

20 

Hz - 

20 

kHz, +/- 0

.5 

dB

S/N Ratio: 

Less than 80dB 

T.H.D: 

0.01% 

at

1KHz

Dimension(LxWxD): 

9” x 9.8” x 3.5” (230 x 250 x 90 mm)

Weight: 

7 Lbs (

3

Kg) 

C RO S S FA D E R   C LE A N I N G

The ESM-11 crossfader may need lubrication from time to time. This will extend
the fader life and eliminate any potential damage due to extended heavy usage.

Cleaning Instructions

1. Remove the crossfader by unscrewing the 2 outer screws (removing the 2
inner screws will detach the fader from the fader plate) and disconnecting the
cable from the mixer.

2. Spray a small amount of cleaner or lubricant into both ends of the fader and
slide the fader back and forth a few times to spread the fluid evenly throughout
the fader.

3. Shake and wipe off excess fluid before re-assembling the fader.

C RO S S FA D E R   R E P L A C E M E N T

To replace the crossfader, follow step 1 of the cleaning instructions.
Replacement parts are available from Stanton or your local Stanton dealer.

WA R R A N T Y

This  unit  has  been  designed  and  manufactured  using  quality
components. Therefore, it is warranted to be free from defects in materi-
als (limited as specified below), and workmanship for a period of thirty
six (36) months from the original purchase date. During this period, all
service and parts necessary to repair a defect will be free of charge. This
limited warranty applies to mechanical parts which are subject to wear
and tear as specified:

• Faders, specified durability: 15,000 cycles
• Rotary potentiometers, specified durability: 10,000 cycles
• Switches, specified durability: 10,000 cycles

Consequently, the parts listed above are warranted to be free from
defects in materials and workmanship for a period of thirty days (30)
days from the original purchase date.

FOR THE WA R R A N TY TO BE VA LID, PLEASE CO M PLE TE THE 

O N LINE WA R R A N TY REGIST R ATION FORM FOUND AT

W W W. STA N TO N M AG N E TI CS . CO M

2821 Evans Street • Hollywood, FL 33020

Summary of Contents for ESM-11

Page 1: ...O PREAMP MIXER OWNER S MANUAL STANTON MAGNETICS LLC 2821 Evans St Hollywood FL 33020 954 929 8999 Fax 954 929 0333 info stantonmagnetics com Register this product online www stantonmagnetics com ESM 11 2000 Stanton Magnetics LLC ...

Page 2: ...DJ community bringing to the marketplace a previously unavailable afford able combination of user friendly functional design rugged construction and pro fessional quality features Stanton and your authorized Stanton dealer are dedicated to your complete satisfac tion by offering benchmark service and support throughout the long life of your Stanton product Again we appreciate your patronage and lo...

Page 3: ...ue pan Fades the headphone output between channels 1 and 2 effectively allowing the user to preview a mix 12 Cue level control Controls the overall headphone output level 13 Headphone output Connection for 1 4 inch headphone Recommended headphone impedance is 32 200 ohms for maximum volume 14 Ground connector Connects to the turntable ground connector to eliminate electrical hum Ground cables are ...

Page 4: ...hake and wipe off excess fluid before re assembling the fader CROSSFADER REPLACEMENT To replace the crossfader follow step 1 of the cleaning instructions Replacement parts are available from Stanton or your local Stanton dealer WARRANTY This unit has been designed and manufactured using quality components Therefore it is warranted to be free from defects in materi als limited as specified below an...

Reviews: