Stanton C.402, User Manual

Page: 9 / 12

5 B . Pausing
˙
Press the PLAY / PAUSE button to switch between play and pause .
˙
The play indicator flashes when the pause mode is set .
˙
Figure 5-2 shows the relationship between play and pause .
2 4 6
1 5
3 7
Figure 5-2
The player has completed the cue or pause operation
and is waiting for the play start command .
PLAY / PAUSE button is presse d and player enters play
mode .
Playing .
The PLAY / PAUSE button is presse d and the unit enters
pause mode .
Pausing .
Playback resumes when the PLAY / PAUSE butt on is
pressed again .
Playing .
6. Cueing
˙
" Cueing " is the process of preparing for playback .
˙
Press the CUE button , the player will enter cue mode . The playback returns to the cue point and the player enters
the pause condition . The cue indicator lights up and the play indicator flashes . When the PLAY / PAUSE button is
pressed , playback starts from the cue point .
˙
When the track search operation is completed after pressing the SKIP buttons , the player automatically finds the
position at which the sound starts and cues there ( Auto Cue ).
˙
If the CUE button is pressed after the search operation or the scanning operation , playback returns to the cue point
and enter pause condition .
˙
Figure 6-1 shows the relationship between the play and back cue operations .
6 2 4
1 5
3
2
1
8
9
3
9
7
8
Figure 6-1
The player has completed the cue or pause operation
and is waiting for the play start command .
When the PLAY / PAUSE button is presse d , playback
starts and the cue point is stored in the memory .
Playing .
The pause mode is set when the PLAY / PAUSE b utton is
pressed again .
Pausing .
The PLAY / PAUSE button is pressed again ;
Playing .
Press the CUE button .
The pickup returns to the cue point .( Back Cue )
Cue point setting :
When play starts from pause by pressing the IN button or by using Scanning or Frame Search , or if you skip to a new
track by using the skip button , the begin play point will be set to the new cue point .
When a new cue point is set , the cue indicator lights by flashing for about 1 second .
NOTE : During cue mode , if the CUE button is pressed and held , playback will start from the cue point . When the button
is released , the player will return to the cue mode automatically . This allows you to check the cue point .
7. Jog Wheel
- The jog wheel serves two functions depending on the current operating mode :
The jog wheel will act as a slow frame search control when the unit is in pause or cue mode allowing you to set a
specific cue point or find a particular starting point .
The wheel also works as a momentary pitch bend during playback . Turning the wheel clockwise will increase the pitch
percentage up to + 16%, and turning the wheel in the counterclockwise direction will decrease the pitch
percentage up to -16%. The pitch bend will be determined on how fast you turn the wheel .
2)
3)
4)
5)
6)
7)
1)
1)
2)
3)
4)
5)
6)
7)
8)
9)
OPERATIONS
8
˙