Stanton C.402, User Manual

Page: 8 / 12

1. Opening and Closing the Disc Holder
Turn the unit power on . Press the OPEN / CLOSE button to open the disc holder .
The disc holder cannot be opened during playback to prevent playback from being interrupted if the OPEN / CLOSE
button is pressed accidentally . Stop the playback first , then press the OPEN / CLOSE button .
2. Loading discs
Hold the disc by the edges and place it in the disc holder , then press the
OPEN / CLOSE button again to close the disc holder . The unit will show the total
track number and the total playing time for about 2 seconds then enter the cue
condition . The cue point will be set to the music starting point of the first track
automatically .
CAUTION :
Do not place any foreign objects in the disc holder , and do not place more than one disc in the disc holder at a time .
Do not push the disc holder in manually when the power is off , as this may result in malfunction and damages the player .
3. Selecting Tracks
Press the TRACK button once to move to next higher or lower track .
Hold the TRACK button to change tracks continuously at a higher speed .
When a new track is selected during playback , playback begins as soon as the skip search operation is completed .
If the TRACK button is pressed while at the last track , the first track is selected . In the same way , if the TRACK
button is pressed while at the first track , the last track is selected .
4. Starting Playback
Press the PLAY / PAUSE button during the pause or cue condition to start playback . T he PLAY indicator will light .
The point at which playback starts is automatically stored in the memory as the cue point . The pickup then returns to
the cue point when the CUE button is pressed . ( Back Cue )
Figure 4-1
5 A . Stopping Playback
There are two ways to stop playback .
1. Press the PLAY / PAUSE button during playback to pause at that point .
2. Press the CUE button during playback to return to the cue point and enter pause condition .( Back Cue )
CUE
Figure 5-1
OPERATIONS
7