1) POLE ASSEMBLY
There are 5 poles which have push button height adjustments. 4 for the corners and one for the center.
Canopy Pole
Tip Loop
Corner poles
A
B
D
Center pole
A
B
C
D
H
2) ROPE & ADJUSTER ASSEMBLY
Assemble the eight ropes and adjusters. Remember to tie a loop large enough to fit over a stake
in the opposite end of each rope from the adjuster
4)
Next slip the looped end of each rope over each stake
leaving the end with the adjuster free.
5)
Take one corner pole and starting with the corner facing the wind, slip
it under the canopy and insert the pole into the corner grommet. Lift the
pole upright and slip the two adjuster rope loops over the pole tip. To adjust
them to hold the pole vertical slide the plastic rope adjusters down toward
the ground stake. A second person is helpful to keep the first pole up.
7)
Now set the center pole through the grommet provided.
Tie the pole securely and be sure the center pole is vertical.
6)
Repeat this procedure on around the canopy. Be sure all poles are
vertical. Adjust the pole heights to make the canopy taught.
8)
Finally, re-tighten all the rope adjusters to remove
all unwanted slack from the unit
Ground
Stake Loop
3) LAYOUT & STAKE PLACEMENT
Lay your canopy out on the ground putting one corner into the wind. Set the eight stakes as illustrated.
Set them about three feet from each other.
Stakes
Wind
Proper Stake
Placement
* ONE LOOP FOR EACH ROPE
