background image

I N T R O D U C T I O N  

LIFT SAFETY—YOUR RESPONSIBILITIES 

    

Am I legally obliged to have my lift maintained?

Am I legally obliged to have my lift maintained?

Am I legally obliged to have my lift maintained?

Am I legally obliged to have my lift maintained?    
Yes. The general duties imposed by The Health and Safety at Work etc Act 1974  supported 
by Provision and Use of Work Equipment Regulations 1998 (PUWER) regulations 5 & 10) 
mean that you are obliged to keep your lift in safe working order. This means you must 
arrange for regular maintenance of your lift. 
 
Am I legally obliged to have my lift Thoroughly Examined?

Am I legally obliged to have my lift Thoroughly Examined?

Am I legally obliged to have my lift Thoroughly Examined?

Am I legally obliged to have my lift Thoroughly Examined?    

Yes. Regulation 9 of the Lifting Operations and Lifting Equipment Regulations 1998 
(LOLER) requires that a lift undergoes an inspection/thorough examination by a competent 
person at regular intervals (twice a year for passenger lifts, once for goods lifts or 
according to the lifts’ situation) and applies to all lifts and lifting equipment used at work.

 

 
I have a lift in my building. What do I need to do?

I have a lift in my building. What do I need to do?

I have a lift in my building. What do I need to do?

I have a lift in my building. What do I need to do?    

You should arrange for the lift to be maintained (regularly serviced and kept in good 
repair) and, if the lift is in a place of work, thoroughly examined at intervals in line with 
legislation.

 

 
What is the difference between ‘Maintenance’ and ‘Thorough Examination’?

What is the difference between ‘Maintenance’ and ‘Thorough Examination’?

What is the difference between ‘Maintenance’ and ‘Thorough Examination’?

What is the difference between ‘Maintenance’ and ‘Thorough Examination’?    

Maintenance 

Maintenance 

Maintenance 

Maintenance is the regular servicing of the lift, encompassing the routine adjustment to 
components, replacement of worn or damaged parts, topping up of fluids and so on, and 
should be carried out by an experienced and competent lift company, such as Stannah Lift 
Services. Maintenance is carried out to ensure the lift runs efficiently and safely. 
 
Thorough Examination 

Thorough Examination 

Thorough Examination 

Thorough Examination is the systematic and detailed visual inspection of the lift and all its 
associated equipment and would usually be carried out by a third party, or an appointed 
‘competent person’. Thorough Examination provides a good check that maintenance is 
being carried out properly. It focuses entirely on the safety of the equipment.

 

 

Authoritative guidance on Thorough Examination as required by Lifting Operations and 
Lifting Equipment Regulations 1998 (LOLER) can be found in The Guidelines for 
Supplementary Testing of In-Service Lifts published by SAFed. Thorough Examination may 
also be referred to as Form 54 or F54 inspection – the code given to the form prescribed 
by repealed Factories Acts. Although no longer prescribed, the term remains in use. Other 
common terms used are: periodic inspection, statutory inspection (because it is required by 
law) or insurance inspection (inspections were often on behalf of insurance companies).

 

    

Do I have a responsibility for trapped passengers?

Do I have a responsibility for trapped passengers?

Do I have a responsibility for trapped passengers?

Do I have a responsibility for trapped passengers? 

Advice on this can be sought from your local Stannah Service Branch.

 

 

 

Summary of Contents for LOWRISER





























Reviews: