3
Functions
TLM160 1.0.0 gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
TR
RO
BG
Area
The result is displayed in the main line.
Volume
The area of the two values measured is displayed in
the main line.
The resulting volume is displayed in the main line.
Staking out of constant distances
Constant distances can be entered for staking out
purposes. The TLM160's display shows the to be
staked out distance as well as multiples of the
distance. As soon as the defined stake out distance
is reached the TLM160 beeps.
Inputting a stake out distance: Press and hold the
, key, the auxiliary line will blink with crosslines.
Change the value in the main line with
and
keys until the desired staking out distance is
displayed. Holding the
and
down will speed
up the adjustment.
By pressing the
key the staking out distance or
multiples of it are displayed in the auxiliary line; the
laser measuring starts. In the main line the distance
between the staking out point (in the auxiliary line)
and the TLM160 (rear measuring reference) is
displayed.
If the TLM160 is moved along the staking out line, the
displayed distance is reduced. At a distance of 0.1 m
to the next staking out point the TLM160 starts to
beep. As soon as the staking out point is reached, the
beep changes and the auxiliary line starts to blink.
Repeat this procedure as often as needed.
The function is stopped by pushing the
key.
Press this key once. This symbol
is
displayed.
Press key and take the first measurement (e.g.
length)
Press key again and take the second measure-
ment (e.g. width)
Press this key twice.This symbol
is
displayed.
Press key and take the first measurement (e.g.
length)
Press key again and take the second measure-
ment (e.g. width)
Press the key to take the third measurement
(e.g. height). The value is displayed in the
second line.
DIST
ON
DIST
ON
DIST
ON
DIST
ON
DIST
ON
DIST
ON
