10
11
UNPACKING & ASSEMBLY
Unpacking
Note: Carefully unpack your pressure washer. This pressure
washer is bulky and heavy, two (2) person lift required.
Dispose of all packing material in an environmentally
responsible manner.
Open carton, gently lift the pressure washer clear of the
carton and packaging, this may require 2 people. Remove
from plastic bag.
Note: Plastic bags can be a danger to young children,
dispose of immediately. Always dispose of packaging in a
responsible manner.
Your Pressure Washer needs minor assembly before use.
HOLDERS (PIC. 2)
1. Align gun and lance holder holes with those on handle.
2. Insert screw to top hole and tighten.
3. Align hose holder hole with the bottom hole in the gun
and lance holder and the handle hole.
4. Insert screw and tighten.
DETERGENT HOLDER (PIC. 3)
1. Align detergent holder holes with those on handle.
2. Insert bolts, nuts and tighten.
3. Slide the detergent bottle and black frame onto the
holder.
4. Take the clear tube and connect the tube end to the
detergent pick up next to the water inlet. Pic 3 & 6.
CONNECTING LANCE TO GUN (PIC. 4)
• Push the lance into the gun firmly.
• Then twist the lance downward while still pushing in.
• This will lock the lance into position.
ADJUSTABLE NOZZLE (PIC. 5)
This pressure washer comes with a factory fitted adjustable
nozzle. This nozzle can be adjusted while in use there is no
need to stop the water flow.
Being an adjustable nozzle, there are many different
positions which will give a variety of different spray widths
and water pressure.
WARNING: Never point or spray water at people or
animals, injury will occur.
WARNING: When adjusting the nozzle be careful of your
hand as the injury may occur if the water spray touches
your hand.
Detergent and low pressure
• While holding the gun twist the nozzle to the left.
High pressure
• While holding the gun twist the nozzle to the right.
PIC. 4
PIC. 5
PIC. 2
Gun
Detergent bottle
and black holder
Lance
PIC. 3
Detergent
pick up
