Stanley SXEW217501, Manual

Page: 17 / 20

16 17
TROUBLE SHOOTING
WHEN THE SWITCH IS IN THE “I” POSITION THE MACHINE WILL NOT START
Possible Cause Suggested Fix
Electrical socket is faulty Check plug, socket, fuses
Voltage is inadequate Check that the voltage is adequate
Power cord is not plugged in Plug in power cord
THE PUMP DOES NOT REACH ADEQUATE PRESSURE OR FLUCTUATES
Water inlet filter is clogged Remove and clean filter
Pump is drawing air Tighten connections/bleed system
Nozzle could be in Detergent Mode Pull nozzle back inwards to high pressure setting
Diameter of garden hose too small Replace with ¾ inch garden hose
Water supply is restricted Check hose for kinks or leaks
Insufficient water supply Fully open water source
THE PRESSURE CLEANER HAS OR WILL NOT MAINTAIN PRESSURE
Excessive air in waterline and pump Turn unit off
THE PRESSURE CLEANER MAKES EXCESSIVE NOISE
Intake is blocked Check the intake valves
Valves are worn, dirty, or clogged Check, clean or replace valves
Filter is dirty Check, clean, or replace filter
6
2
3
4
5
1
PARTS DIAGRAM
Part Description Part No.
1 Hose 84 EW2175H
2 Gun & Lance 84 EW2175GT
3 Gun Holder 84 EW2175GH
4 Lance Support 84 EW2175N
5 Power Cord Holder 84 EW2175PCH
6 Hose Holder and Handle 84 EW2175HR
User replaceable parts listed below. All other parts must be
serviced/replaced by an authorised service agent.