Stanley SXEW217501 Manual Download Page 14

14

15

NOZZLES

Your pressure washer is supplied with these nozzles;

ADJUSTABLE NOZZLE PIC. 9

This nozzle can be adjusted while in use there is no need to stop 
the water flow.
Being an adjustable nozzle, there are many different positions 
which will give a variety of different spray widths and water 
pressure.
WARNING: Never point or spray water at people or animals, 
injury will occur.
WARNING: When adjusting the nozzle be careful of your hand 
as the injury may occur if the water spray touches your hand.

Low pressure and wide spray

•   While holding the gun twist the nozzle to the left

High pressure and narrow spray

•   While holding the gun twist the nozzle to the right

DETERGENT NOZZLE

Only use a biodegradable detergent as this will not clog the 
detergent bottle/nozzle. When finished using the detergent 
ensure that you have cleaned the detergent bottle/nozzle with 
clean 

water before storing.

1   Turn pressure washer off.
2   Lift the lid and fill the bottle with your desired detergent.  

Ideally use a biodegradable detergent as this will not clog 
the detergent bottle/nozzle.

3   Clip the detergent lid back in place
4   Pull the nozzle outward this is the detergent setting.
5   Rotate the nozzle clockwise or anti-clockwise to adjust the 

spray pattern.

6   Turn pressure washer on and continue cleaning
7   If you need a greater amount of detergent rotate the variable 

control “Clockwise”, see page 14 Pic. 8.

8   If you need a lesser amount of detergent rotate the variable 

control “Anti-Clockwise”, see page 14 Pic. 8.

9  Return nozzle to high pressure setting by pulling nozzle back 

inwards.

PIC. 9

PIC. 10

NARROW 

SPRAY

HIGH PRESSURE SETTING

LOW PRESSURE SETTING

LOW

HIGH

WIDE 

SPRAY

Summary of Contents for SXEW217501





















Reviews: