Stanley SXEW188501 Quick Start Manual Download Page 5

4

5

ASSEMBLY

This pressure washer MUST be fully assembled by you prior 
to use.  Failure to do so will result in the warranty being VOID.  
Failure to fully assemble this pressure washer may also result in 
personal injury.

SAFETY

Before attempting to operate this pressure washer the following 
basic safety precautions should be taken to reduce the risk 
of fire, electric shock and personal injury.  It is important to 
read the instruction manual and to understand applications, 
limitations and potential hazards associated with this pressure 
washer.  It is important that you read, understand and follow 
these instructions very carefully. This pressure washer is not 
intended for use by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience 
and knowledge, unless they have been given supervision or 
instruction concerning the use of the appliance by a person 
responsible for their safety.

BEWARE OF CHILDREN & PETS

Children and pets should be kept out of the operating area.  
Children should not be allowed to touch or operate pressure 
washers.  All pressure washers should be kept out of reach 
of children.  When NOT in use keep the pressure washer 
preferably stored or locked in a secure well ventilated cabinet 
or room.  

WORK AREA

Work areas and benches should be kept tidy. Cluttered benches 
and work areas can cause accidents. Floors should be kept 
clean and free from rubbish.  Special care should be taken 
when the floor is slippery due to sawdust or wax. Always leave 
sufficient distance, at least 5 metres between the pressure 
washer and the work area.

OPERATING ENVIRONMENT

ALWAYS use your pressure washer in an open well ventilated 
area.  Do not expose your pressure washer to rain.  Do not 
expose your pressure washer to direct sunlight.  Keep the work 
area well lit.  Do not use your pressure washer in areas where 
there is a risk of explosion or fire from combustible materials, 
flammable liquids, paint, varnish, petrol, etc flammable 
gases and dust of an explosive nature.  As a precaution it is 
recommended that you consult an expert on selecting and using 
a suitable fire extinguisher and have it available for use in an 
emergency when operating the pressure washer.

SELECT A PRESSURE WASHER WITH A 

SUFFICIENT RATING

Select the right pressure washer for the job.  Do not use a 
pressure washer to do a job for which it was not designed.   
Do not force a small pressure washer to do the job of a heavy 
duty pressure washer.  Any damage caused by overloading  
will void the warranty.  Do not use pressure washers for 
purposes not intended.

HOT COMPONENTS

Beware many of the components will get hot during use.  Never 
touch any of the metal pipes, pump or motor as these may burn.

GUARD AGAINST ELECTRIC SHOCK

Avoid body contact with earthed or grounded surfaces (e.g. 
pipes and refrigerators).

DO NOT ABUSE THE POWER CORD

Never yank or pull on the power cord to disconnect it from the 
mains supply socket. Never carry or pull your pressure washer 
by its power cord. Keep the power cord away from heat, oil, 
solvents and sharp edges. Regularly check the plug and cord 
and if damaged stop using the pressure washer immediately 
and have it replaced by an authorised service facility.

EXTENSION CORDS AND REELS

Use of an extension cord with this product is NOT 
RECOMMENDED. If you must use an extension cord, use only 
extension cords that are intended for outdoor use. These cords 
are identified by a marking “ACCEPTABLE FOR USE WITH 
OUTDOOR APPLIANCES, STORE INDOORS WHILE NOT IN USE.” 
Use only extension cords having an electrical rating not less 
than the rating of the product. Examine extension cord before 
use. DO NOT USE DAMAGED EXTENSION CORDS!  If damaged 
never use always replace.

Always disconnect the extension cord from the power point 
before disconnecting the product from the extension cord.

WARNING – To reduce the risk of electrocution, keep all 
connections dry and off the ground. Do not touch the plug with 
wet hands.

•   Do not use the appliance if a supply cord or important  

parts of the appliance are damaged, e.g. safety devices, high  
pressure hoses, trigger gun.

•   If an extension cord is used, the plug and socket must be of  

watertight construction.

•   WARNING: Inadequate extension cords can be dangerous
•   Remove the plug from the socket-outlet during cleaning  

or maintenance and when replacing arts or converting the  
machine to another function.

GENERAL SAFETY INSTRUCTIONS

Summary of Contents for SXEW188501

















Reviews: