background image

2

3

Dear Customer,

Thank you for purchasing this pressure washer which has 
passed through our extensive quality assurance processes. 
Every care has been taken to ensure that it reaches you in 
perfect condition. However, in the unlikely event that you should 
experience a problem, or if you require any assistance please 
do not hesitate to contact us;

If you have a problem, call customer service do not 
return this pressure washer to the place of purchase.

CUSTOMER SERVICE

Australia: 1300 660 457

New Zealand: 0800 474 876

Operating times: Monday – Friday

8.00am - 5.00 pm

Australian Eastern Standard Time (AEST)

EXPRESS WARRANTY STATEMENT 

PRESSURE WASHER

You are not required to do anything to register your pressure 
washer purchase.  Please attach the purchase receipt to this 
manual and ensure both are kept safe.  We hope you enjoy 
your new pressure washer, and if you have any problems call 
customer service on the above phone numbers.  Do not return to 
place of purchase.

Smart Marketing Group Pty Ltd (SMG) warrants that this 
pressure washer will be free from manufacturing faults or 
defects for 24 months from the date of purchase, providing 
original purchase receipt is kept and shown when needed and 
is subject to the terms and conditions below.

If a warranty fault appears within the warranty period, SMG 
reserves the right to replace or repair the product.  In the event 
that SMG chooses to replace the product, this original warranty 
will expire at the original date.  If the product includes various 
accessories or components, only the defective accessory or 
component will be replaced or repaired.

SMG reserves the right to replace defective parts of the 
product with parts and components of similar quality, grade and 
composition where an identical part or component is not available.

Products presented for repair may be replaced by refurbished 
products of the same type rather than being repaired.  
Refurbished parts may be used to repair the products.

WHAT IS COVERED

• Manufacturing fault or defect.

HOW TO CLAIM UNDER THIS WARRANTY

•   Call customer service.
•   Ensure you have the following: Original purchase  

receipt, Model of pressure washer, Serial number  
of pressure washer.

•   Discuss the issue.
•   Customer service will advise which authorised service  

agent to take the pressure washer to provided the issue 
is a warranty one.

•   Take pressure washer to authorised service agent   

for repair.

WHAT IS NOT COVERED

•   Use of Pressure Washer for hire.
•   Commercial use of pressure washer.
•   Use of pressure washer in a commercial premises.
•   Damage or deterioration due to transport.
•   Damage caused by negligence, misuse, abuse or accident 

or incorrect voltage and wattage.

•   Any corrosion or rusting.
•   Damage caused by incorrect set up and start up.
•   Replacement parts due to general wear and tear.
•   Pressure washers with serial number defacement, 

modification or removal.

•   Pressure washers which have been serviced by other than 

an authorised SMG service agent.

•   Pressure washers with no original purchase receipt.
•   Pressure washers which have been on sold,  

not original purchaser.

•   Damage due non-servicing of pressure washer as is 

required by this manual.

•   Blockages / damage caused by dust, dirt, spiders webs  

or insects.

•   Damage caused by the incorrect fitting of accessories.
•   Damage caused by overloading, overworking  

the pressure washer.

•   Damage to attached equipment or third party accessories.
•   Damage caused by attached equipment or  

third party accessories.

CONTACT DETAILS

Smart Marketing Group Pty Ltd 
33-35 Lionel Road, Mt. Waverley 
Victoria 3149, Australia. 
Tel (+613) 9543 7266 
Fax (+613) 9543 9839 
[email protected]

INTRODUCTION

Summary of Contents for SXEW174001

















Reviews: