4
ENGLISH
Electric Fan Heater (ST-221A-240-E / ST-222A-240-E)
• Position the fan heater so that it stands upright on a firm,
level surface and at a safe distance from wet environments
and flammable objects.
• Connect the fan heater to the proper electrical power.
• Set the thermostat dial to the maximum temperature.
• The fan heater will switch on when the function dial is set to
one of the two power settings.
• Once the room reaches the desired temperature, turn the
thermostat dial back until heating element turns off.
Automatic Overheat Safety Control
• This heater is equipped with safety internal heat limiting
thermostat and an overheat protection circuit. When a
potential overheat temperature is reached, the system will
automatically shut the heater off.
Thermostat Instructions
• Set the thermostat to MAX and let the heater operate with
full power input. When the room temperature reaches the
required temperature, turn the thermostat to the left until it
switches off.
• The thermostat will then switch on and off automatically to
control the room temperature according to the preset value
and keep the room temperature constant.
NOTICE:
When using the heater for the first time, you may
notice a slight emission of smoke. This is normal and will
stop after a short time. The heating element is made of
steel and was coated with a layer of protective oil during
production. The smoke is caused by the leftover oil as it is
heated.
FEATURES
OPERATION
SETTING
FUNCTION
UNIT IS OFF
FAN RUNS - NO HEATING
FAN RUNS - HALF POWER HEATING
FAN RUNS - FULL POWER HEATING
NOTE: THE FAN WILL RUN CONTINUOUSLY WHILE THE HEATER IS OPERATING
Function
Control
Dial
Hot Air
Outlet
Tip-Over
Switch
Thermostat
Control Dial
Power
Indicator
Light
ST-221A-240-E
ST-222A-240-E
