background image

Please note the serial number of your fan, and write it on the back of this User’s Manual for future reference.

950451000-14

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT: 

Read and understand all of the instructions in this manual before assembling, 

starting, or servicing the fan. Improper use of this fan can cause serious injury. Keep this manual for 

future reference.

For General Ventilating Use Only. Do Not Use To Exhaust Hazardous Or Explosive 

Materials And Vapors.  Never use the fan in spaces which contain products such as 

gasoline, solvents, paint thinners, dust particles, volatile or airborne combustibles, or any unknown 

chemicals.

Model Numbers: ST-42-BDF-E / ST-36-DDF-E / ST-20F-DDF-E / 

ST-20FO-DDF-E / ST-30P-DDF-E

User’s Manual and Operating Instructions

CAUTION

42” Belt-Drive Barrel 

Fan

ST-42-BDF-E

20” Floor Fan

ST-20F-DDF-E

36” Direct-Drive Barrel 

Fan

20” Omni Floor Fan

ST-20FO-DDF

30” Pedestal Fan

ST-30P-DDF-E

'

(

7

6

,

/

&0

86

&

'

(

7

6

,

/

&0

86

&

'

(

7

6

,

/

&0

86

&

ST-36-DDF-E

© 2016 Obelis S.A Registered Address:

Bd. Général Wahis, 53, 1030 Brussels, Belgium

Summary of Contents for ST-20F-DDF-E











Reviews: