SRP 2240 / 3860
User
Manual ◄ 21
Maintenance work - Machine
Torque Information
MAINTENANCE
Cleaning
Clean the machine thoroughly daily.
Attention
Tightening Torque
Important
For cleaning, do not use any flammable or
aggressive materials.
When cleaning the machine with a pressure
washer, do not spray the electrical components
directly.
When cleaning the machine with a pressure
washer, do not hold it directly over the air filter.
• Clean the machine on a daily basis.
• After cleaning all cables, hoses and connections check
the unit for leakage on hoses or at connections. Check for
chafing points and other damage.
Do not use your hand to check hoses for leaks as this
could cause pressurized oil injection into body.
• Detected faults are to be eliminated immediately.
Strength grades for screws with untreated, unlubricated
surfaces.
The values show 90% use of the yield strength; at a friction
coef- ficient of µtot = 0.14.
Tightening torque is controlled with torque wrenches.
The values given do not apply when MoS2 lubrication is
used.
Replace all self-locking nuts after each
disassembly.
