15
15
fig.23
18
STORAGE
If the tiller will not be used for a period longer than
30 days, following the steps below to prepare your
tiller for storage.
1. Drain the fuel tank completely. Stored fuel
containing ethanol or MTBE can start to go stale
in 30 days. Stale fuel has a high gum content
and can clog the carburetor and restrict fuel
flow.
2. Start the engine and allow it to run until it stops.
This ensures no fuel is left in the carburetor.
This helps prevent gum deposits from forming
inside the carburetor and possible engine
damage.
3. While the engine is still warm, drain the oil from
the engine. Refill with fresh oil of the grade
recommended in the Engine Manual.
4. Allow the engine to cool. Remove the spark
plug and put 30 ml (1 oz.) of high quality motor
oil into the cylinder. Pull the starter rope slowly
to distribute the oil. Replace the spark plug.
Remove the spark plug and drain all
of the oil from the cylinder before
attempting to start the unit after
storage.
5. Use clean cloths to clean off the outside of the
tiller and to keep the air vents free of
obstructions.
Do not use strong detergents or
petroleum based cleaners when
cleaning plastic parts. Chemicals can
damage plastics.
6. Inspect for any loose or damaged parts. Repair
or replace damaged parts and tighten loose
screws, nuts or bolts.
7. Remove the tines. Clean and apply oil to the
tines and tine shafts to prevent rusting. Mount
the tines onto the tine shafts.
8. Oil the control cables and all visible moving
parts. Do not remove the engine cover.
9. To store with the handles folded down, loosen
the knobs that secure the upper handle to the
lower handles. Carefully fold the upper handle
down. Do not allow control cables to become
pinched or bent. Tighten the knobs.
Do not sore tiller with fuel in a
nonventilated area where fuel fumes may
reach flame, sparks, or any ignition
sources.
Use only approved fuel containers
.
Specification
Engine 4-stroke, air-cooled single cylinder, OHV
Max. Power (kw/rpm)
1.8/3600
Displacement (cc) 94
Fuel Tank Capacity (L)
1.5
Oil Capacity(L)
0.4
Tilling Width (mm) 450
Tilling diameter (mm) 260
Tine Speed (rpm)
Forward 180/Reverse 100
Starting Type Recoil
Sound power level L
WA
91.2 dB(A)
,
K=3dB
Sound pressure level L
PA
87.8 dB (A), K=3dB
Garantierter Schallleistungspegel L
WA
: 93dB(A)
Vibrating level on handlebar grips
Left: 11.7 m/s
2
, K=1,5m/s
2
Right: 10 m/s
2
, K=1,5m/s
2
G
B