Maintenance
Section 5
Page 3
MSD SABER SERIES SHEARS
RECOMMENDED SPARE PARTS LIST
The following is a description of the parts Stanley LaBounty recommends to have on hand for these benefi ts.
1.
Less downtime for lack of a part.
2.
Original equipment manufacturer parts are inspected to Stanley LaBounty standards for proper fi t and
function.
3.
Eliminate the possibility of a part being unavailable for immediate delivery.
4.
Eliminate overnight air freight costs.
5.
The accessibility of replacement parts assures the proper shear maintenance will be followed and there-
fore increase the effi ciency of the shear.
UPPER AND LOWER JAWS OF THE
SHEAR:
BASIC ASSEMBLY
Cutting blades
Guide blade
All bolts and washers used to fasten blades
Blade shims for lower shear blades (not supplied
with new blades)
Complete blade kits
UPPER SHEAR
Saber Tip™
One extra upper secondary blade
All bolts & washers used to fasten tip
HYDRAULIC ASSEMBLY
All hydraulic hoses
O-ring face seal adapters (ORS)
CYLINDER ASSEMBLY
Cylinder seal kit (ordered by cylinder part
number and serial number)
ROTATION ASSEMBLY
if equipped
Crossover relief or motion control valve (one
is applicable to each rotation assembly)
MANIFOLD ASSEMBLY
if equipped
O-ring seals
Crown seals
STANLEY LABOUNTY BLADE MAINTENANCE TOOL KIT
P/N 184238.
Do not substitute parts unless you know they are
the same in ALL characteristics. Your warranty could
be compromised by using parts other than original
LaBounty parts.
Refer to the shear parts catalog for specifi c part
numbers. Be sure to reference the attachment serial
number.
NOTICE
NOTICE
