background image

5

4

DIGITAL LCD SCREEN

PANTALLA DEL LCD DIGITAL

BA

TTER
Y ST
ATUS ICON

ICONO DE EST

ADO DE 

LA

 

BA

TERÍA

DIGIT
AL 

DISPLA

Y (V
ARIES BY FUNCTION)

INDICADOR DIGIT

AL (V
ARÍA DEPENDIENDO DE LA

 

FUNCIÓN)

ALARM ICON

ICONO DE ALARMA

REVERSE POLARITY ICONS

ICONOS DE POLARIDAD INVERSA

CLAMP ICONS

ICONOS DE PINZAS

COMPRESSOR PRESSURE

 

INDICA

TOR

INDICADOR DE PRESIÓN DEL

 

COMPRESOR

USB ICON

ICONO DE USB

COMPRESSOR ICON

ICONO DEL COMPRESOR

JUMP ST

AR

TER ICON

ICONO DEL PUENTE AUXILIAR DE ARRANQUE

FAUL
T ICON

ICONO DEL F

ALLO

VOL
TAGE 
INDICA

TOR

INDICADOR DEL VOL

TAJE

SAFETY GUIDELINES / 

DEFINITIONS

DANGER: 

Indicates an imminently hazardous situation which, if not avoided, 

will

 result in 

death or serious injury.

WARNING: 

Indicates a potentially hazardous situation which, if not avoided, 

may

 result in 

death or serious injury.

CAUTION: 

Indicates a potentially hazardous situation which, if not avoided, 

may

 result in 

minor or moderate injury.

Used without the word, indicates a safety related message.

NOTICE: 

Indicates a practice 

not related to personal injury

 which, if not 

avoided, 

may

 result in 

property damage.

RISK OF UNSAFE OPERATION. 

When using tools or equipment, basic 

safety precautions should always be followed to reduce the risk of personal injury. 

Improper operation, maintenance or modification of tools or equipment could 

result in serious injury and property damage. There are certain applications for 

which tools and equipment are designed. Manufacturer strongly recommends that 

this product NOT be modified and/or used for any application other than for which 

it was designed. Read and understand all warnings and operating instructions 

before using any tool or equipment.

READ ALL 

INSTRUCTIONS

WARNING: 

Read and understand this instruction manual before 

using this unit. Failure to follow all instructions listed below may result in 

electric shock, fire and/or serious injury.

IMPORTANT SAFETY 

INSTRUCTIONS

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

• 

This unit was designed for household use only.

WARNING – 

Risk of fire, electric shock, burst hazard, or injury to 

persons or property:

• 

Avoid dangerous environments. 

Don’t use appliances in damp or wet locations. 

Don’t use appliances in the rain.

• 

Keep children away. 

All visitors should be kept at a distance from work area.

• 

Dress properly.

 Do not wear loose clothing or jewelry. They can be caught in 

moving parts. Rubber gloves and substantial, non-skid footwear are recommended 

when working outdoors. Wear protective hair covering to contain long hair.

• 

Store idle appliance indoors. 

When not in use, appliances should be stored 

indoors in dry, and high or locked-up place – out of reach of children.

• 

Don’t abuse cord. 

Never carry appliance by cord or yank it to disconnect from 

receptacle. Keep cord from heat, oil, and sharp edges.

• 

Disconnect appliances. 

Disconnect the appliance from the power supply when 

not in use, before servicing, and when changing accessories.

• 

Ground Fault Circuit Interrupter (GFCI) protection

 should be provided on 

the circuits or outlets to be used. Receptacles are available having built in GFCI 

protection and may be used for this measure of safety.

• 

Use of accessories and attachments. 

The use of any accessory or attachment 

not recommended for use with this appliance could be hazardous. Refer to the 

accessory section of this manual for further details.

• 

Stay alert.

 Use common sense. Do not operate this equipment when you are 

tired or impaired.

• 

Check for damaged parts. 

Any part that is damaged should be replaced by the 

manufacturer before further use. Do not use tool if switch does not turn it on and 

off. Contact the manufacturer at 1-877-571-2391 for more information.

• 

Do not operate this appliance near flammable liquids or in gaseous or 

explosive atmospheres. 

Motors in these tools normally spark, and the sparks 

might ignite fumes.

• 

Never submerge this unit in water;

 do not expose it to rain, snow or use 

when wet.

• 

To reduce risk of electric shock,

 disconnect the unit from any power source 

before attempting maintenance or cleaning. Turning off controls without 

disconnecting will not reduce this risk.

• 

This equipment employs parts (switches, relays, etc.) that produce arcs or 

sparks. 

Therefore, if used in a garage or enclosed area, the unit MUST be placed 

not less than 18 inches above the floor.

• 

Do not insert foreign objects into the USB ports.

SPECIFIC SAFETY INSTRUCTIONS FOR CHARGING THIS UNIT

• 

IMPORTANT: 

This unit is delivered in a partially charged state. Fully charge unit 

with a household extension cord for a full 40 hours or until the battery status icon 

shows 4 solid bars before using for the first time. You cannot overcharge the unit 

using the AC charging method.

• Never attempt to use the AC and DC charging methods at the same time.

• All functions should be turned off when the unit is charging or not in use. Make 

sure all switches are in the OFF position before connection to a power source or 

load.

EXTENSION CORDS:

WARNING: 

Use of improper extension cord could result in a risk of fire 

and electric shock. When using an extension cord, make sure that the pins of the 

extension cord are the same number, size and shape as those in the charger; and 

be sure to use one heavy enough to carry the current your product will draw. An 

undersized cord will cause a drop in line voltage resulting in loss of power and 

overheating. The following table shows the correct size to use depending on cord 

length and nameplate ampere rating. If in doubt, use the next heavier gauge. The 

smaller the gauge number, the heavier the cord.

MINIMUM GAUGE FOR CORD SETS

Volts  

Total Length of Cord in Feet (meters)

120V 

0-25  26-50  51-100 101-150 

 

(0-7.6m)  (7.6-15.2m)  (15.2-30.4m) (30.4-45.7m)

240V 

0-50 

 51-100 

101-200 

201-300 

 

(0-15.2m)  (15.2-30.4m) (30.4-60.9m) (60.9-91.4m)

Ampere Rating  

Extension Cord Length

More 

Not more  

0’-25’ 

26’-50’ 

51’-100’   101’ -150’

Than 

Than 

American Wire Gauge (AWG)

 0 - 

 6 

18 

16 

16 

14

 

-  10 

18 16  14 12

10 

-  12 

16 16  14 12

12 - 

16 

14 

12 

Not Recommended

When an extension cord is used,

 make sure that:

 – the pins of extension cord are the same number, size and shape as those in 

the charger,

 – the extension cord is properly wired and in good electrical condition,

 – the wire size is large enough for the AC rating of the charger.

CAUTION – 

To reduce the risk of injury or property damage:  

Pull the extension cord by the plug rather than the cord when disconnecting from 

the built-in 120 volt AC charger.

SPECIFIC SAFETY INSTRUCTIONS FOR JUMP STARTERS

WARNING –

 Burst hazard:

Do not use the unit for charging dry-cell batteries that are commonly used with 

home appliances. These batteries may burst and cause injury to persons and 

damage property. Use the unit for charging/boosting a lead-acid battery only. It is 

not intended to supply power to a low-voltage electrical system other than in a 

starter-motor application.

• Use of an attachment not supplied, recommended or sold by manufacturer 

specifically for use with this unit may result in a risk of electrical shock and injury 

to persons.

WARNING –

 Risk of explosive gases:

• Working in the vicinity of a lead acid battery is dangerous. Batteries generate 

explosive gases during normal battery operation. For this reason, it is of the 

utmost importance that each time before using the jump-starter you read this 

manual and follow instructions exactly.

• To reduce the risk of battery explosion, follow these instructions and those 

published by the battery manufacturer and manufacturer of any equipment you 

intend to use in the vicinity of the battery. Review cautionary markings on these 

products and on the engine.

CAUTION – 

To reduce the risk of injury or property damage:

• 

NEVER ATTEMPT TO JUMP-START OR CHARGE A FROZEN BATTERY.

J5C09D_ManualENSP_060721.indd   4-5

J5C09D_ManualENSP_060721.indd   4-5

6/8/2021   12:21:16 PM

6/8/2021   12:21:16 PM

Summary of Contents for J5C09D









Reviews: