Stanley FMC600, Original Instructions Manual

Page: 9 / 96

9
ENGLISH (Original instructions)
u
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com.
Technical data
FMC600 (H1)
Voltage V
DC
18
No-load speed Min
-1
0-400/0-1600
Max. torque Nm 49.6
Chuck capacity mm 13
Max Drilling capacity
Steel/wood/masonry mm 13/38
Charger 905998** typ. 1 906086** typ. 1
Input Voltage V
AC
230 230
Output Voltage V
DC
18 18
Current A 1 2
Approx. charge time min 90 - 240 45 - 120
Battery FMC685L FMC687L FMC688L
Voltage V
DC
18 18 18
Capacity Ah 1.5 2.0 4.0
Type Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN 62841
Sound pressure (L
pA
) 88 dB(A), uncertainty (K) 5 dB(A)
Sound power (L
WA
) 99 dB(A), uncertainty (K) 5 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Drilling into metal (a
h, D
) 2.7 m/s
2
, uncertainty (K) 1.5 m/s
2