Stanley Fatmax SFMCPS620, Instruction Manual

Page: 15 / 64

13
English
battery performance and life, store battery packs at room
temperature when not in use.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be recharged
before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge battery packs only with designated
chargers. Charging battery packs other than the
designated batteries with a charger may make
them burst or lead to other dangerous situations.
Do not incinerate the battery pack.
Battery Type
The SFMCPS620 operates on a 18 volt battery pack.
These battery packs may be used: SFMCB202, SFMCB204,
SFMCB206. Refer to
Technical Data for more information.
Date Code Position (Fig. A)
The date code 20 , which also includes the year of manufacture,
is printed into the housing.
Example:
2020 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Pole saw
1 Shoulder strap
1 Instruction manual
1 Li‑Ion battery pack**
1 Li‑Ion battery charger**
**Included with SFMCPS620M1 Only
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear eye protection.
Wear ear protection.
Do not leave in rain.
Wear head protection.
Wear protective gloves.
Cut hazard. Keep fingers away from slot.
Wear protective footwear.
Rotational direction of the saw chain.
Electrocution hazard. Keep at least 10 m away from
overhead lines.
Switch the tool off. Before performing any maintenance
on the tool, remove the battery from the tool.
94
Directive 2000/14/EC guaranteed sound power.
Keep bystanders away.